Инженер по контролю за качеством геологоразведочных работ (QA/QC)( Полиметалл )

Описание

RESUME
Rajan kumar Chuahan - (B.E in Mechanical Engineering .)

⬥ Mob: +91 9662154250 ⬥E-Mail : rajc1006@yahoo.com


Seeking a position to utilize my skills & abilities in mechanical industry, to contribute with the best
individual efforts for achieving the desired goal.

SUMMARY
⮚ A Qualified Mechanical Engineer , experience in Construction of Oil & Gas/Refineries/Fertilizer sector.
⮚ (B.E in Mechanical) passed out in 2013 with 6.34 CGPA .
⮚ Acquired knowledge of new methods, technology & industry trends while undertaking projects.
⮚ Proficient in grasping new technical concepts and utilizing them effectively.
⮚ Keen learner with constant zest to acquire new skills.
⮚ Diligent, team player with effective communication skills.
⮚ Area of interest –Maintenance, field /site works in oil & gas, fertilizer, refineries, and drilling field

TOTAL EXPERIENCE

TOTAL EXPERIENCE: 10 YEAR'S IN OIL &GAS, TANKAGE, STRUCTURE, PIPING AND PIPELINE.

PROFESSIONAL EXPERIENCE

1. Company Name : Bureau Veritas (India) Pvt Ltd
Client : Shop Inspection (Vendor Inspection)
Designation : Mechanical Surveyor (TPI)
Duration : From July 2022 to till now

JOB PROFILE: -
 Inspection of Structural steel, final inspection of Valves, Pipes, Pipe fittings, Welding & Painting
inspection.
 Inspection of fabrication of Structural Steel.
 Review of welding procedure specifications and welding operator’s qualifications.
 Witnessing of any and all required tests to ensure strict compliance to approved drawings, procedures
and specific ations.
 Final inspections prior to dispatch which may include cleaning, painting, packing & marking of
equipment’s, review of vendor final documentation dossier.
 Perform “Hold”, “Witness” & “Surveillance” inspection & tests as per approved ITP at manufactu ring
facilities to ensure the compliance with client requirements and project specification.
 Visual, dimensional inspection, material traceability check and witnessing of material(plates, pipes,
flanges, tubes, valves, fittings & structural items) as per approved drawings, final performance test,
pneumatic test, hydro test at manufacturer facility as per client standard.
 Prepare inspection report of inspected items.
 Perform welding inspection including review of approved welding documents(WPS, PQR, WQT), d rawing
approvals, material test certificates as per bill of material, applicable ASTM/ASME standards, visual

marking and traceability, weld joint fit up inspection, visual welding inspection, dimension inspection as
per drawing applicable tolerance sheets.
 Review the entire Material test certificate and documents as per Quality plan, P.O.& Specification .
 Witness hydro test of Valves, Pipes & Tubes performed at vendor shop.
 Responsible for verifying calibration records for testing & inspection equipment’s.
 Review of Radiographic films(RTFI) of welds & Witness of Ultrasonic testing of welds, plates, pipes,
MPT/LPT of welds & Destructive testing(Tensile test, Charpy Impact test, Bend test, Hardness test).
 Inspection of raw materials (pipes, flanges, elbow, reducer, paints, electrode & other consumables etc)
as per IMIR & correlate physically with invoice, MTC, IRN, delivery challan, packing list & PO.
 Witness of PMI for raw material of stainless steel & alloy steels.
 Identification of material as per drawing at fabrication regarding heat no. color code & stenciling.
 Inspection of fit up as per approved fabrication & erection procedure & checking for joint identification,
bevel angle, root gap & alignment etc.

2. Company Name : TUV SUD South Asia Pvt Ltd
Client : ONGC, Mahesana
Designation : Inspection Engineer
Project : Laying & maintenance of underground carbon steel pipeline, various expansion
or modification work & storage tank repair work in various fields of Mehsana assets.
Duration : From February 2019 to October 2023

JOB PROFILE: -
 Conducting a welder performance qualification test as per ASME Sec -IX and Review QA/QC documents,
WPS, WQT, EQT, PQR as per client specification.
 Witnessed & checked Ultrasonic thickness measurement on New plates materials.
 Witness Stagewise Painting inspection (DFT measurement) as per client specification.
 Monitoring of site welding, WPS, PQR, Review of Radiography films, Lowering, Trenching, Bac k filling,
Boring, HDD, Hydro testing etc.
 Preparation and submission of daily site inspection/activities report.
 Inspection of painting/coating and NDT, welding of line pipe as ensure that they meet the set
specifications and set QAP standards.
 Ensure painting coating process and related activities carried by the contractor are meeting the set
procedures, codes, standards and specifications.
 Mechanical Lab tests such as Tensile test, Impact test, Bend test and verified on line test such as blast
cleanl iness, blast profile, thickness check, coating roughness and holiday detection.
 Accountable for the preparation of the daily surveillance and inspection reports.
 Witness of NDT Methods i.e. UT, RT, PT, MPT, Film interpretati on and Hydro testing to pipes.
 Inspection of painting/coating and NDT, Welding of pipeline & line pipe as ensure that they meet the set
specifications and set QAP standards.
 Ensure painting coating process and related activities carried by the contractor are meeting the set
procedures, codes, standards and specifications.
 Ensure that stage -wise inspection is carried out on a regular basis and that all the ITP & Project
specif ication are being met.
 Inspection of valves and various fittings physically check with material test certificate.
 Monitoring vaccum box test on bottom plates joints & roof pneumatic test as per API 653.
 Witness of Hydrostatic test, pneumatic test, fille d water test, vacuum box test, shop et c. of storage tank
As per client approved proce dure and applicable standard.
 Well versed with international standards & codes as API 1104, ASME -IX, OISD 129, API 653 & ASME
sec.V.

3. Company Name : Moody International (I) Pvt. Ltd.
Client : G ujarat Gas Limited.
Designation : Inspection Engineer
Project : Laying of Underground Steel pipeline & Cascade Hydro testing
Duration : From October, 2016 to February, 2019

JOB PROFILE: -

 Review QA/QC documents, site quality plans, inspection test plans, work procedures, welding
procedures etc as per client specification.
 Preparation and submission of daily site inspection/activities report.
 To prepare my own section’s Monthly report.
 Review & Check of Instruments are calibrated comply with the Original Test certificate and conducted
material inspection to insure used comp ly with the Ori ginal Test certificate required technical
specification.
 Materials receipt inspection and verification.
 Witness & Inspect NDT method such as Ultrasonic Testing, Magnetic Particle Test, Liquid Penetrant Test
on pipeline joint and Interpretati on for Radiographic film as per Client specification/standard.
 Witness Hydro test and Pneumatic test procedure as per Client specification/standard.
 Witness on various Destructive test like as Tensile test, Impact test, Nick Break, Bend test etc. for WPS as
per Client specifications.
 Monitoring and verifying blasting and painting quality by DFT Gauge to ensure compliance with relevant
specification.
 Witness on various activities such as Swabbing, Stringing, Sand blasting, Peel test after weld joint,
Holiday test process before pulling/lowering as per Client specification/standards.
 Prepare all types of report such as Work progress, Rejection and Final Inspection report to submit to
client.
 Ensure all preparation and application is conduc ted in accor dance with accepted
procedures/specifications.
 Knowledge about ASME, API Standards.
 Review of the method statement & Crossing Drawing Such as a HDD.
 Fit up inspection and welding visual inspection.
 Surface visual inspection after sand blasting.
 Co -ordinating with the client as per project requirements.

4. Company Name : Taru Overseas Pvt. Ltd.
Client : GGL & SGL
Designation : Sr. QC Engineer
Duration : From April, 2014 to October, 2016

JOB PROFILE: -
 Controlling and performing Quality control activities as per Project Quality Plan, Inspection
Test Plan and Project specification like IS 8451, IS 5844 and Gas Cylinders Rule 2004 for clients
Gujarat Gas Limited and Sabarmati Gas Limited.
 Monitoring visual, In process and final inspection activities at different stages as per required.
 Prepare & Inspect Quality documents to every inspection stage.
 Inspect the job while incoming, in process and final inspection.
 Co -оrdination with Third Party Inspection like as TUV -SUD, SGS, ICS, VCS.

 Performing activities like Rotary inspection of cylinders, inside visual inspection with
boroscope, External visual inspection, Ultrasonic thickness Measurement, Ultrasonic Testing
 scanning with TR probe, before & after rotary inspection tare weight check etc.
 Witnessing Hydro Test around 435 Kgf/cm2 and preparation hydro test report as per
calculation.
 Monitoring Visual inspection after shot blasting for external surface defects, su rface roughness
profile, primer painting visual appearance and DFT, Final paint visual appearance and DFT.
 Handling audits of project requirements, specifications and test plans related to the PESO.
 Implemented best practices for enhancing the performance of the team and maintaining space
with the current technological change and development.
 Final Inspection Report preparation.

SKILL SET

Software tools : M S Word, Power Point, Excel, Autocad.
ACADEMIC QUALIFICATIONS

B.E in Mechanical Engineer in 2013 from Hasmukh Goswami College of Engineering (GTU) , Ahmedabad.
NDT LEVEL II (ASNT - RT,UT,LPT & MPT ) IN 2016 from Ultra Tech, Ahmedabad(Gujarat) &
Renewed NDT LEVEL II (ASNT - RT,UT,LPT & MPT) IN 2021 from Dev Ndt, Ahmedabad(Gujarat).

PERSONAL DETAIL

Permenent address : B-103, Shyam Residency, Nr. Shiv Shakti school, Sneh Plaza, IOC Road,
Chandkheda, Ahmedabad - 382424.
Language kno wn : English, Gujarati & H indi
Religion : Hindu
D.O.B. : 10/06/1992
Email id : rajc1006@yahoo.com
Contact no : +91 9662154250

DECLARATION
Having been actively involved with Piping and structural projects in refinery, oil &gas, and also having updated my
technical base with practical work knowledge along with hands on experience in the mech anical system and
procedures. I am sure I would be able to work in any other similar atmosphere and carry out construction,
maintenance and other mechanical related assignments to the best of my knowledge and abilities.

DATE ……………………..
Place: Ahmedabad Rajan kumar Chauhan